1. The use of safety features opening and closing the lid safety device to ensure that the lid and the pot can not snap in place pressure on Shaanxi kettle, pot has a lid 2. The set pressure not limited pressure device, when the pot temperature, pressure control malfunction, exceeds the maximum working pressure reaches limit pressure value, pressure limiting exhaust valve auto exhaust pressure limiting. 3. With safety relief device, when the pressure limiting device failure, pressure rose pot limit pressure value, the lid around the automatic exhaust relief, blasting pot phenomenon does not occur. The device features a real-time temperature, when inner pot roast or inside an empty pot temperature exceeds the set temperature, automatically exit the heated state. 1. The use of electric pressure cooker lid: first hand grip lid handle clockwise side of the lid to the limit, and then upward. 2. Remove the inner pot, food and water into the pot, food and water should not exceed 4/5 of the height of the inner pot; the water is easy to inflate food shall not exceed the height of the inner pot 3/5; food and water within not less than Pot height of 1/5. * 4L, 5L, 6L maximum amount of boiled rice were 8 cups, 10 cups, 12 cups. * 1 cup of rice with a glass of water. The user can adjust the amount of water, depending on rice quality and personal tastes. * Cup capacity of 180ml 3. Put the inner pot outside the pot: Before placed, first wipe clean the inner pot and hot plate, hot plate and the outer surface of the pot should not put debris; later placed around gently rotating inner pot, inner pot ensure good contact with the hot plate. 4. Close the cover: Check that the sealing ring has been placed on the inside of the lid rim; left hand rotate the ring, making it freely evenly placed on rims; cover, and then rotate the lid counterclockwise to buckle co-location, and hear a "click" sound snap. 5. Position the limit pressure release valve, release the pressure limiting valve position "seal" position Shandong kettle, and check the float valve is falling (not heated before the float valve is falling). 6. The power boost lights. (If you do not set the dwell time, while boosting the lights off, packing light Beijing kettle, in the insulating state.) Garment Steamer Garment Steamer failure analysis failure 1. Steamer no steam (1) power control switch did not open - Check Garment Steamer is connected to the power, if not please turn the power control switch. (2) water tank is too small - to turn off the steamer plus water. (3) steam pipe off dead - ensure Garment Steamer steam pipes are completely undone. (4) there is no water in the tank - Turn off the steamer were adding water. (5) steam is not lit up - After the lights, turn on the pump control buttons, work lights after the pump light can be used. (6) the pump work is not lit - Press the button on the handle pump control, light steam (7) pedal is not lit - check the product is not the right plug in the power, turn pedal power control switch. (8) handle the work is not lit - Press the steam head control buttons, lights steam. 2. Failure steam head dripping (1) in the presence of liquefied water pipes - Do not use the horizontal, the vertical height of the steam pipe steam pipe hold the water back to the steamer. (2) steam head itself, dripping head of steam, the general design of the steam brush, then you can replace the steamer. Zhengzhou, Henan Wei Di Electric Kettle _ (certified) _ kettle provided by Wei Tai Trading Co., Ltd., Henan. Henan Wei Tai Trading Co. (www.weidihn.com) is Zhengzhou, a leader in home appliances products agents, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Henan Wei Tai Electric led the staff warmly welcome all inquiries negotiations to create Henan Wei Tai Electric a better future.